24/7 line 0203 488 0733
Step-free showers

Wet room installation and walk-in showers in London

From the outside, wet room installation looks simple, and a walk-in shower even more so. No tray, no enclosure, just a floor that drains. What really makes it work is hidden underneath: waterproof tanking carried up the walls, a floor laid to fall towards the drain, and a gully big enough for the flow. If any of that is wrong, the leak appears two floors below, long after the tiler has left.

Call 0203 488 0733 Message us
  • You hear the price before any work starts
  • Gas Safe registered and insured
  • DBS-checked engineers at your door
  • Emergency line open 24/7

Mon–Fri 8:00–17:30 · Emergency callout available 24/7

Ask us about wet rooms & walk-in showers

Your name, number and postcode is enough to start. The rest can wait.

How soon do you need us?
Tell us a bit more if you like

Quicker to talk? Call 0203 488 0733 or WhatsApp 020 3488 3737

Your details are used for this job and nothing else. Privacy policy

The job, in short

What we’ll do for you

  • Complete wet room conversions, tanked and with floors formed
  • Walk-in and level-access showers, without a full wet room
  • Falls set properly towards the drain, never judged by eye
  • Tanking carried up the walls and round every pipe
  • Linear and point drains sized for your shower’s flow
  • Accessible wet rooms, including for wheelchair users
Tell us about yours
Quick checks

Try these before you ring

You might fix it yourself. If so, great. If not, we’re a call away.

Waterproofing is the real work, tiling is the finish

A tanking membrane, run up the walls and sealed around every pipe that comes through, is what keeps water out of the floor and the flat underneath. Lay tiles over poor tanking and it will still leak. It just takes longer to show.

Check the floor depth first, especially in a flat

Creating a fall to the drain normally means lowering the floor, and you need enough depth in the joists or slab to do that well. In a top-floor flat with little build-up, check this at the very start, not the end.

In a flat, bring the freeholder in early

Changing the floor build-up and drainage for a wet room in a leasehold flat often needs the freeholder’s consent. It can also affect the ceiling void of the flat below. Raise it early, before the floor is opened up.

A walk-in shower and a wet room aren’t the same thing

A walk-in shower with a tray and a glass panel gives you most of the look without lowering the floor, and it’s a smaller job. If you truly need level access, a full wet room is the answer. For most other people, a walk-in tray is the better fit.

Your questions

What people ask us

Will I need planning permission or building control sign-off?

You won’t need planning permission for a like-for-like bathroom. Building regulations do cover the waterproofing and drainage, and we always work to them.

Can I have a wet room in a flat, or only a house?

Flats are fine. Just check the floor depth and the freeholder’s consent early on, because either could limit what you can do before you settle on a design.

How long does a full wet room take to fit?

Usually one to two weeks, depending on how much floor forming and finishing is needed. It takes longer than a normal bathroom refit because the tanking needs time to dry at each stage.

Will it start to smell or let damp through over time?

Not if the tanking and falls are done right and left to cure before the tiles go on. When wet rooms fail, it’s usually because the drying time was rushed, not because of the idea itself.

There’s more

Other jobs we can help with

Looking for wet rooms & walk-in showers in London?

Here when you need us. Say what’s up and where you are. We’ll give you the price before we start.

Call 0203 488 0733 Message us